Author Archives

Troy

Grilled Stuffed Poblano Peppers

Grilled stuffed poblano peppers and a bell pepper

Two grilled stuffed poblano peppers and a grilled stuffed bell pepper on a bed of yellow rice.

Stuffed peppers were always a common meal that my mother cooked up while I was growing up. She would take green bell peppers, cut off the top of them, remove the inner part and ‘veins’ along with the seeds, roast them in the oven until the peppers would be partially cooked and then stuff them with an assortment of toppings.

Usually, those said toppings included the ground beef that she would brown up in a skillet with a diced onion, tomato sauce and shredded cheddar cheese. She would turn these into a meal, sometimes paired with a pan of fresh cornbread (my parents were veritable bread fiends who always seemed to feature some kind of bread as a side item for most meals).

I didn’t begin cooking until I was nearly 21-years-old in 2012, and the idea of cooking up a batch of stuffed peppers never occurred to me until well after my mom’s stroke in November 2018. While taking care of her, she asked if I could cook some for dinner one evening. I couldn’t believe that, after nearly seven years of cooking, I had never thought about cooking them since they made for a fairly quick and easy dinner during weeknights when I was a child, so I recreated her recipe, except I incorporated white rice that I cooked in some chicken broth and Italian seasoning to go along with the browned ground beef, diced onions and tomato sauce.

These days, I have what I will declare as a way better version of stuffed peppers: grilled stuffed peppers. I have thrown down some grilled, stuffed bell peppers multiple times at this point, but recently my local grocery store has begun to sell poblano peppers. Poblano peppers are just about as mild as bell peppers, but I prefer the flavor. Today, I want to offer you guys the prospect of grilling stuffed poblano peppers, which I believe you should include in your future grill meals this summer (or in the spring, fall and winter if you are a year-round outdoor griller like me).

For the grilled stuffed poblano peppers, I want to mention that I left out the tomato sauce. I didn’t have any on hand, but they were just fine without them. If you want to use them, then fair game! Add what you see fit. I made some with browned ground beef and some with leftover pulled pork that I smoked in my recently purchased Po’Man Grill. As much as I would like to call this a recipe, consider it to be more of a guide. Without further ado, let’s roll on to it.

Ingredients

How to Grill Stuffed Poblano Peppers

In this recipe, I grilled a couple of stuffed bell peppers as well, for the picky crowd, so keep this in mind if anybody requests that variety.

  1. Cook the yellow rice according to the package instructions (I used a family pack of the yellow rice — boil 3 and 1/2 cups of water, add the package of rice, reduce heat to medium low and cover for 20 minutes or until done).
  2. You can do this on your grill, but I was in a hurry, so I browned up the ground beef and diced onions in the taco seasoning in my cast iron skillet on my stove.
  3. Using a charcoal grill (if you are using a gas grill, fire it up to 350-400 degrees), I lit a small chimney of charcoal, allowed it to burn for 20-25 minutes and added them to the grill before adding my grates and procuring the lid on top. Both the intake and exhaust vents were set to being wide open.
  4. Preparing the poblano peppers — I removed the tops, sliced them into two sections and flatted them (seeds removed). This is my method that I find to be the most efficient: I applied a liberal amount of cooking oil (I used canola oil) to my hands and rubbed the skin and innards of the peppers. This is to create a thin layer of fat on the peppers in order to help the roasting process and keep them from sticking on the grill grates.
  5. I placed the peppers skin-side down onto the grate over the hot coals and cooked them for a couple of minutes before flipping them over to cook the inside of them for an additional minute or two before removing them.
  6. I added a spoonful or two of rice to the peppers followed by the pulled pork on some of them and ground beef and onions on the others before topping them with the cheese. This allows the cheese to melt down on everything.
  7. I re-added the peppers to the indirect side of the grill, closed the lid and allowed the cheese to melt for five to ten minutes.
  8. Remove and enjoy!

I highly recommend giving this recipe a shot. If you choose to use bell peppers, give them the same treatment with the coking oil and blemishing of the skin and innards on the grill for that classic grilled flavor. If you try this recipe (er, guide), let me know what you think in the comments.

The Key to Smoking a Great Brisket

Smoked, sliced beef brisket

If you held a gun to my head and delivered the ultimatum to me in the guise of a question of, “If you could only cook one food in the realm of barbecue for the rest of your life, what would it be?”, the subjective answer of mine is brisket.

The first time I ever tasted a smoked beef brisket cooked by someone at their home, and not at a restaurant, was in 2016. It was sitting in a foil pan, and it was chopped brisket, almost shredded. It sat in a mix of beef broth and juices from the meat itself. It was served for breakfast with biscuits. I ate mine on one of those said biscuits with a little bit of mayonnaise. Unconventional, but it was delicious. At that point in 2016, I had little to no knowledge about barbecue. If you have read my past posts, you will know that before 2016 my idea of barbecue was, well, barbecue sauce. I cannot emphasize how ignorant I was.

When I received my first smoker in December 2016, which was a used vertical Brinkmann Trailmaster stick burner smoker, I had brisket on my brain in terms of ideas of what I wanted to try smoking in the future, and so I hopped on Google and devoured all the information I could on how to smoke a brisket.

In that research, I learned that ‘chopped’ brisket was a variation of cooking it to the point of it being overcooked by traditional barbecue standards. I discovered that it was supposed to be sliced, and for the brisket to be considered true smoked beef brisket, that it would have to ‘pass the bend test’ as the slices would have to ‘fold’ over your finger when you hold it up, and furthermore, it would need to pass the ‘pull test’ where you take a slice of brisket and slightly pull it apart as it breaks into two pieces while still maintaining its sliced form, proving tenderness.

The brisket pull test

The brisket ‘pull test.’

Nonetheless, I did not smoke my first brisket until September 2017, and by that time I had been using my 22.5” Weber Smokey Mountain cooker since June of that year. A whole packer, which is what one calls a full brisket featuring its two parts – the point and the flat – in the barbecue world, was on my radar, but I was cautious. Before I continue, I want to mention that the point is the ‘fatty’ part of the brisket, often used to make burnt ends, and the flat is the learner part of the brisket.

I was daunted. When I was researching how to properly smoke a brisket, I discovered that it was allegedly the toughest food to properly cook in the barbecue world, and it served as some sort of litmus test for all true pitmasers.

With that said, when I smoked my first brisket, it was a four or five pound flat from Sam’s Club. On that day in September 2017, I was smoking a host of items in my WSM, from a head of cabbage with butter and Tony Chachere’s Creole seasoning (so good, by the way!) to potatoes and a pork butt for a family dinner.

Smoked and sliced beef brisket Smoked beef brisket

Somehow, I managed to cook it just right, and my family loved it.

My confidence skyrocketed, and just a few weeks later in October 2017, I bought a 12-lb. whole packer brisket from Wal-Mart. This time, instead of starting early in the morning like I did with the first brisket flat, I wanted to cook this one overnight. I started it at around 9 p.m. in my WSM with a mix of Kingsford charcoal briquettes, hickory and applewood.

When I woke up at 8 a.m. the following day, my WSM was still running at around 220-225 degrees, and the brisket was reading 180 degrees on my meat thermometer. Here is where I made a mistake: I wrapped it in foil and placed it back into the WSM. Now, the foiling of the brisket was not the mistake, but what I subsequently chose to do surely was. After another two hours in the pit, the brisket had not reached the internal temp of 200-202 like I was hoping for, so I removed it and placed it in my oven on 375 degrees. Yes, I really did that, and now I’m cringing.

Placing the brisket at that temperature in the oven wouldn’t have been the downfall if I had left it in there for a short amount of time, but it was in the oven for over an hour and a half, and when I removed it, I immediately opened the foil and sliced it up. Guess what? It was stringy. I made pulled brisket. I was so upset. After doing so well with the brisket flat, with this whole packer I failed. Now, was it still delicious? Absolutely. It was smokey, rich with flavor and tender, but that isn’t how I wanted to cook it. I made pulled brisket sandwiches that day, and the next day I made brisket chili with the leftovers. Not all was lost, but I learned a lesson on that day.

The beef brisket that I ruined

Here is the beautiful beef brisket that I subsequently ruined. I don’t have any post-shred photos because I was too upset with myself to take any.

You can’t truly hurry barbecue. Sure, you can wrap meats in foil – the ‘Texas Crutch’ method – and speed up the cooking process, but speaking of a process, that is exactly what barbecue is. I rushed this brisket and threw it in the oven at a high temperature to hurry it along, and I overcooked it.

Nowadays, I smoke my briskets in one of my Barrel House Cookers, hot’n’fast style. I will hang them in the BHCs until they reach an internal temperature of 160-165 degrees, wrap them in foil, re-hang them in the cooker and let it roll until I hit 198-202 degrees and remove it afterwards for a lengthy (one to four hours) rest in a cooler, wrapped in a towel.

Rest Your Brisket

That is the biggest key to smoking a great brisket. Resting it. Perhaps you thought my long-windedness was going to arrive to the conclusion of, ‘not hurrying it along,’ which is also important, but notice when I was describing my failure above, I immediately opened the foil and began to cut the brisket up. When you rest a brisket, you allow the juices – that would otherwise rapidly leak on out of the meat, along with the steam from the heat, causing the meat to dry up – to thicken and release more slowly, resulting in a juicy brisket.

Furthermore, resting a brisket allows the collagen within the meat to soften and become gelatin. The fat further renders. The product itself is simply better.

I have smoked at least thirty briskets since that fateful day in October 2017, and it still haunts me. Luckily, that has never happened again.

While I do smoke 99% of my briskets in one of my Barrel House Cookers these days, last May I did complete another overnight smoked brisket in my Weber Smokey Mountain, and this time it was a success. When I smoke up the morning after I began the cook, I wrapped the brisket in foil, added some more charcoal to my WSM, and allowed it to ride for a few hours until it hit 199 degrees internally. Afterwards, it rested in a cooler for over two hours. The results were much better than they were from that day in October 2017.

The key to smoking a great brisket: be patient, allow it to ride out for the full cook and yield it the proper time it needs to rest before you slice it up.

Launching the Grizzly BBQ YouTube Channel

I have spent over three years toiling around with the prospect of putting together a YouTube channel for Grizzly BBQ.

Over the last year, I have posted a few videos that I had posted on Instagram, but they were hardly YouTube worthy. Being that the videos were from Instagram, they were short clips with nary any interaction involved. I suppose I just wanted to kick the channel off. I would have stopped procrastinating and started this YouTube adventure much sooner, but with 2019 being such a chaotic year, I had my priorities placed elsewhere. With more time available in my days in 2020, I am able to commit my energy into growing this cooking channel.

A few days ago, I cooked up a birthday dinner for my cousin Rachel’s 11-year-old son, and I decided to film bits and pieces of that day’s cook (which you can see above in my unofficial Grizzly BBQ channel introduction). I smoked a 10-lb. pork butt in my Barrel House Cooker 14D, and in my Barrel House Cooker 18C I smoked a 3-pound chub of bologna along with over 60 bacon-wrapped jalapeno poppers (some with cheddar cheese; others with cream cheese). Indoors, I deep-fried over 60 chicken wings and around 20 chicken legs/drumsticks.

Yesterday, I lightly documented my cook of a double smoked ham. It was a precooked ham that was smoked with hickory wood, so I fired up my offset stick burner smoker and smoked it in order to get it up to temperature (130 degrees) with a few split logs of hickory that I had on hand.

Somehow, prior to the cook from the other day, I had 49 subscribers to my channel. I believe I know the culprit behind that. Back in February, I posted a short clip to my @grizzly.bbq Instagram page where I was hot’n’fast smoking some burgers and bacon. I live on a rural piece of farmland, and my smoker is just in front of a fence that features a vast field behind it. Cows, being the curious animals that they are, lined up behind the fence where my offset smoker sits, and I shot a quick video cracking a couple of jokes. I said, “Welcome to my barbecue class. Grizzly BBQ. I guess these (alluding to the cows watching) are my students… and the product.” Somehow, this video has over 8,000 views at the time of writing this post. I reckon that is where the bulk of my subscribers have come from.

There are going to be some growing pains along the way. I am not used to filming my cooks in this manner. I’m used to posting short clips to Instagram. I’m new to video editing, and I have simply been doing so using an app on my phone, but in the near future I’m going to look into other forms of video editing software. I’m such an amateur right now. I’m filming with my phone and winging it.

I would like to invite you to come aboard and join me in this YouTubing adventure. Hit me up with some likes and a subscription. I would greatly appreciate it. I promise the videos will be better as time ensues. I won’t only feature barbecue, but I plan on doing other forms of grub slinging from grilling to griddling on my Blackstone griddles to documenting some indoor cooks.

Chipotle Chicken Fajitas on the Blackstone Griddle

Chipotle Chicken Fajitas on the Blackstone Griddle



Believe it or not, this was my first time making chicken fajitas on the Blackstone griddle. I do have an excuse for that, which is one of my family members not being a fan of chicken, but still! After nearly three years of use, this was my first go-’round with them on the flat top.

One of the many great things about having an outdoor griddle, whether it is a Blackstone or a Camp Chef or a Blue Rhino or Royal Gourmet, is the versatility of it, and when it comes to versatility in cooking, fajitas — much like stir-fry — are something you can do anything with.

Traditionally, when you go to a Tex-Mex restaurant and order fajitas, what you are likely to receive is your choice of meat mixed together in a blend with cooked sliced bell peppers and onions, served with warmed flour tortillas, refried beans, rice and a little bit of greenery in the form of a tiny salad with tomatoes and a dollop of guacamole. However, at home, you can use whatever the heck you want. You can even make vegetarian fajitas with sliced portobello mushrooms if you would like. (A vegetarian dish being suggested on Grizzly BBQ? You don’t see that too often.)

At the same typical Tex-Mex restaurant, the fajitas comes out while sizzling on an oval cast iron skillet that is sitting on a wooden trivet. Truthfully, that is just for show, but you can’t deny the hunger augmenting effects it has on you and the others around when the dish is brought to the table, especially if your appetite is voracious and you are waiting to satiate it. At home, you could do the same for your guests by sitting a cast iron on the flat top until it heats up, adding your cooked meat and vegetables afterwards, and ensuingly walk into your home like a boss, but maybe I’m just boring, because I added these fajitas to a large bowl.

There are no rules when it comes to fajitas. Do what you want. If a culinary elitist tries to jump down your throat over the technicalities of fajitas, pay them no mind while you stuff your face with incomparable deliciousness. Let’s roll onto the recipe.

Chipotle Chicken Fajitas on the Blackstone Griddle

How to Make Chipotle Chicken Fajitas on the Blackstone Griddle

Do keep in mind that you can make these in a grilling basket (or cast iron skillet) on a gas or charcoal grill, or you can make them indoors in a cast iron skillet (I recommend cast iron for a proper sear of the meat). I enjoyed cooking them on my 36″ Blackstone griddle due to the overall cooking space.

As stated above, you can change up any ingredients you would like. One thing I would recommend, that I did not do, is cooking a combination of both chicken tenderloins (or butterflied chicken breasts) and boneless, skinless chicken thighs. The reason for this is that you will feature the best of both worlds: the lean white meat chicken from the breast along with the juicy flavor from the fat content in the dark meat from the boneless, skinless thighs. I had chicken tenderloins on hand. Keep in mind that if you cook with chicken breasts, you should butterfly them so that they are thin enough to cook so that the internal temperature of the breasts reach 165 degrees without burning the outside of them, which can happen if the breasts are too thick.

Furthermore, if you want to, you can slice and dice up the chicken prior to cooking, but in the past when I have cooked meals similar to this, what happens is that the meat does not brown as well. I cooked the chicken tenderloins first, and then I sliced/shredded them up before mixing them together with the sauce.

I used raw flour tortillas that I bought from Kroger and cooked on the griddle. I believe they taste better, with a higher quality texture, than precooked tortillas, but you can use whichever you would like. Whatever you have at your disposal is a solid general rule if I had to make one for these.

Ingredients Used

  • A couple lbs. of chicken tenderloins
  • 1 stick of salted butter (cut in half)
  • 1 diced yellow onion
  • 3 cloves of minced garlic
  • 1 habanero pepper, chopped and de-seeded (optional)
  • 1 red bell pepper sliced
  • 1 yellow bell pepper sliced
  • 1 can of Embasa chipotle peppers in adobo sauce
  • Sazon (I used La Preferida)

Step-by-Step Instructions

1.) After slicing and dicing up the vegetables, fire up two of the burners on the griddle to medium-high heat
2.) Once thoroughly heated (about seven or eight minutes), add one of the halves from the stick of butter and spread it around around before placing each piece of chicken onto the flat top cooking surface
3.) Cook the chicken for around five or six minutes on each side, or until the internal temperature of the respective chicken pieces reach 165 degrees, and place it on a cutting board.
4.) Lower heat to low, add the other half of the stick of butter (spread around, again) and the peppers and diced onions to the cooking surface, occasionally stirring.
5.) Slice up the chicken during this sequence
6.) Turn the heat back up to medium high and add the minced garlic, stirring frequently for about a minute
7.) Re-add the chicken to the mix and liberally season with Sazon
8.) Add the can of chipotle peppers in adobo sauce
9.) Mix together for about two or three minutes
10.) Add to a serving plate for a bowl. Cover with foil or whatever you have on hand to keep warm
11.) Scrape the griddle surface from anything that was potentially stuck to it
12.) Cook the raw tortillas for about a minute or so on each side
13.) You are ready to eat. Enjoy! Serve with sour cream, guacamole, refried beans and rice, or whatever you would like.

Cooked chipotle chicken fajitas on the Blackstone Griddle

If you decide to give this recipe a shot, and I highly recommend it, let me know what you think in the comments.

Is It Still Worth it to Buy a Barrel House Cooker?

Is It Still Worth it to Buy a Barrel House Cooker?

You have been in the market under the notion of buying a new smoker for a while. After much deliberation, you decide that you are most interested in a drum/barrel-like smoker for hot’n’fast style cooking and the ability to hang meats. In your barbecue-fueled research, you come across the BHC (Barrel House Cooker) and the PBC (Pit Barrel Cooker). The PBC is arguably the most popular, highly heralded pre-built drum cooker in the world. However, your interest is piqued by the features of the BHC, as it appears it can do a bit more in the cooking and user accessibility side of things than the PBC.

However, in the same vain of research, you might discover that Barrel House Cooker was recently acquired by Pit Barrel Cooker. That could be why you are here right now, as you consider your upcoming prospective purcase of a new drum smoker. Yes, that is true. Barrel House is now owned by the Noah Glanville (creator of the PBC). In short, a legal battle broke out after PBC sued BHC. The results of the lawsuit found that BHC would have to pay royalties to Noah and PBC with some of the proceeds from each sale of a BHC. It wasn’t long before PBC acquired BHC in an act of debt forgiveness.

You might be wondering, with the advent of this news being uncovered, if it is still worth purchasing a Barrel House Cooker. My answer to that curiosity is a resounding yes. You can take my word however you want it, but I have two Barrel House Cookers, and I have cooked with them at least one hundred times since my original purchase in April 2018. You can read my extensive review of the Barrel House Cooker 18C here.

The Glanville family announced that Barrel House Cookers are going to continue to be produced alongside Pit Barrel Cookers. It has been noted that they will still be operating under the two separate names. This should dispel any concerns over the cookers being removed from the market.

Barrel House Cooker 18C

My Barrel House Cooker 18C smoking away. Photo is from July 2018.

I bought my BHC 18C cooker for $249 (plus tax) in 2018. Nowadays, the BHC is sold on Amazon for $299. While the price increase is unfortunate, the BHC is more than worth purchasing, especially over the PBC. I absolutely know and understand that the PBC is a fine, exceptional cooker — which is why it is so popular and receives as much love as it does — but I simply prefer the BHC’s plethora of extra features, which is objectively cool to use when possible.

These are a couple of the advantages the Barrel House Cooker offers over the Pit Barrel Cooker (it is actually nice to be able to write this now, without fear of debates arising over BHC vs. PBC, now knowing that Noah Glanville and Co. are benefiting from both entities now).

Advantages (Features) of the BHC That Are Better Than the PBC

  • Easier access to modify your coal/wood positioning or remove ash. On the Pit Barrel Cooker, access to your charcoal basket is rather limited, since you have to sit the basket inside the cooker, at the bottom, and being able to access the basket of coals while in the middle of a cook is next to impossible barring some unnecessary, aggravating inconveniences. With the Barrel House Cooker, you can remove the middle base of the cooker from the bottom, remove the charcoal basket and empty ashes (using some heat resistant gloves) and resume cooking once placing the base back onto the cooker.
  • Perhaps it is the bigger competitive advantage of the two, but the Barrel House Cooker has made the bottom part of its cookers to where you can place the cooking grate over top of where you have your charcoal and use it as a hibachi! As far as I know, this cannot be done on the Pit Barrel Cooker. There is nothing like smoking a tri-tip until you hit about 120-125 degrees on the internal temperature before removing the base, adding the cooking grate to the bottom, over top of the coals, and searing that delicious tri-tip to perfection. The options are virtually unlimited as far as what you’d like to reverse sear by par-smoking a particular piece of meat(s) and finishing on the hibachi insert.
  • The Barrel House Cooker features a thermometer on the lid while the Pit Barrel Cooker does not. I know plenty of (myself included) barbecue fanatics who like to use thermometers made by Thermoworks or Maverick (and others) to gauge the grate temperatures, but I find this to be a point worth mentioning.

If you are on the fence, I can’t help but recommend that you go ahead and give Barrel House Cooker a shot. The features are nice, it is durable (I can speak for myself, and for many others from a Barrel House Cooker hangout group on social media, when I write that) and easy to use. It pumps out excellent barbecue, which I can also vouch for, and you will find that in a myriad of my posts on here where I have been consistently using my Barrel House Cookers for the last two years. My only complaint is that I did not purchase one sooner.

Barrel House Cooker Has Been Acquired By Pit Barrel Cooker

Barrel House Cooker Has Been Acquired By Pit Barrel Cooker

It is official, and I’m late to the party of announcing this, but about three weeks ago it was announced that Barrel House Cooker Company has been acquired by Noah Glanville, creator of the Pit Barrel Cooker Company. I like to keep the readers of Grizzly BBQ in the ‘know’ of this type of news, especially since I’m an avid user of both the Barrel House Cooker 14D — which has unfortunately been discontinued — and the Barrel House Cooker 18C.

This was the announcement posted by Noah Glanville of PBC:

This is Noah Glanville, some of you may know my family for our popular Pit Barrel Cooker, and I’m excited to announce today that we have recently expanded our barbecue family with the acquisition of The Barrel House Cooker Company, LLC. As pioneers in the vertical cooker market, we’ve always strived to bring the best products to the consumer. Part of that winning formula is making our customers a big part of our decision-making process, especially when it comes to product and innovation. So, we’re excited to bring our industry knowledge together with your passion for the Barrel House Cooker to chart the future course for the company and the brand.

Welcome to our barbecue family, and expect to hear more from us in the coming weeks. In the meantime, stay safe in these uncertain times, and join us in sharing a great meal with family.

Thank you,

Noah Glanville

Owner of The Barrel House Cooker Company, LLC

Cofounder, President and CEO of Pit Barrel Cooker Co.

If you are interested in reading the press release which concerns the announcement of the acquisition, click here.

If you aren’t in the knowing of the swing of things, a legal battle was formed between Pit Barrel Cooker and Barrel House Cooker when the two were separate entities. PBC alleged that its design was duplicated as part of a contract dispute, with possible claims that BHC reneged on the contract in order to create its drum smoker. The result of the lawsuit featured PBC being paid payments (by BHC) and receiving royalties from future sales of the BHC, which was effective beginning around sometime in May 2018 (the time the lawsuit was resolved). From what I have heard, the original owner of Barrel House Cooker Co. chose to ‘hand over’ the company as a whole to Noah and Pit Barrel Cooker Co. as part of debt forgiveness.

As for what the future of Barrel House Cooker entails? This is a post by BHC on social media:

The Barrel House Cooker Company, LLC and Pit Barrel Cooker Co. are two separate companies and brands. We are always innovating and listening to our customer’s feedback. At this time there are no plans to consolidate nor combine the two cookers.

I am ecstatic to hear that Noah and PBC are going to continue to create Barrel House Cookers going forward. This is exceptional news. I have said it in multiple posts on Grizzly BBQ, but I can’t help but feel like the Barrel House is a superior cooker in comparison to the Pit Barrel. Sure, the PBC is more popular and was the first commercially successful pre-built drum smoker to practically take over the market in the realm of drum cookers, but the features of the BHC — thermometer on the lid, removable charcoal base, ability to use the aforementioned charcoal base as a hibachi by sitting the grates directly on top of it to sear things like tri-tip or thick cuts of steak — puts it over the top.

I have also stated time and time again that, if BHC were to quit producing cookers altogether and my two cookers were to wear out, I would have no problem purchasing a PBC because I am fully aware of how excellent they are. At the same rate, I would have been underwhelmed because the PBC simply has less features and is not as user accessible in comparison to the BHC, and that is an objective fact.

Ever since the beginning of 2019, I have been wary about the future of Barrel House.

I feel that I am safe to say this now, but in November 2018, a former employee of Barrel House — someone who I am friends with to this day — sent me a message telling me that he and a multitude of his colleagues had been laid off by BHC Co. He then told me that he had been told that the company was planning on selling the remainder of its cookers and was going to subsequently shut down. He had no information beyond that, as that was all the information he was told. He asked me for the conversation to remain between the two of us during that time. Now that Pit Barrel has acquired Barrel House, with granted permission I feel that such older news like that is now worth being mentioned, since the end of Barrel House did not reach fruition, thankfully.

Going forward, it is going to be interesting to see what Pit Barrel decides to do with Barrel House. I have my reservations and concerns. The two Barrel House Cooker models that I own, which I purchased in early 2018, are sturdy and have survived hundreds of cooks in the last two years, have proven to be sturdy and durable. However, I can’t help but wonder if Noah and PBC will begin using cheaper parts to produce them as time ensues. This is not me throwing any shade of Noah or PBC, but simply curiosity out of the prospect of wondering if that will happen in order to save money and overhead overall.

Furthermore, it was announced a while back that Barrel House has discontinued its original 14D model, and that is a crying shame. Speaking subjectively on behalf of my own opinion, the 14D model is superior to the 18C. While it holds less food given that it is a smaller cooker, I liked three of its features much better than the 18C: the 14D’s midsection can latch to the charcoal base which makes it more secure and airtight, the 14D has a lid hinge unlike the 18C and, finally, the 14D has intake vents on the lower side of the charcoal base which is different than the 18C as the 18C features the overall intake vent placed on the bottom of the cooker and is controlled by a ‘pull-in’/’pull-out’ handle. Asides from that, the tallness of the 14D is an advantage. With the 18C, it is shorter and things like ribs and big briskets can hang too close to the fire*.

* – A stainless steel extension kit for the Barrel House Cooker 18C was created in 2018. I received one and use it to this day. It works fantastically well in order to keep food further away from the fuel/heat source. However, for the time being, the extension kit has been discontinued and it is not being made, much to the chagrin of new users who are having to cut their ribs in half in order to hang them in the 18C cookers. Hopefully Noah and PBC will listen to all the collective requests being mentioned by users who do not have possession of the original extension kit, because it is a necessity to use one from where I stand.

I appreciate that Barrel House Cookers are still going to be produced going forward. They are exceptional cookers and I recommend them to everyone who is looking into buying a drum smoker. Perhaps now, PBC and BHC users can come together and enjoy the discussion of great barbecue rather than engaging in any types of pseudo-rivalries that could come about in a heated discussion over ‘which cooker is better’. It is all about sharing the love and creation of good grub, no matter how you see it.

You can currently purchase a Barrel House Cooker on Amazon.

Enchilada Tacos with Smoked Beef

Enchilada tacos with smoked beef on the Blackstone Griddle

Over the last year on social media, I keep seeing videos from food trucks pop up featuring tacos, made from corn tortillas, being dipped in an enchilada-like sauce and cooked on a screaming hot griddle surface prior to being topped with a variety of toppings, folded over, crisped and served to customers. This intrigued me, so I figured I would whip up my own recipe in an experiment by making tacos in this manner on my 36″ Blackstone griddle.

I haven’t been able to find a conclusive name for this type of taco. In my Googling research, I have found a specialty dish that was founded in Jalisco in Mexico, called ‘Birria’, which is a spicy stew. However, this isn’t birria or close to it. So I can only refer to these as ‘enchilada’ tacos.

If you have been following Grizzly BBQ, you will find that I recently posted about smoking chuck roast in the last week. As an alternative to brisket, I highly recommend giving it a go, because generally it is going to be cheaper than brisket — not per pound, but by being a smaller ration of meat. When cooked correctly, it stands almost next to brisket in terms of flavor. Don’t get me wrong: that sounds like a touch of hyperbole in that sentence, but hear me out; a properly smoked chuck roast can achieve a level of a smoky beef flavor that will impart a delicious level of smoke in whatever dish you feature it in. That is what I used in these tacos, and if you decide to make these for yourself, you won’t be kicking yourself at the end of the day. You will be happy you have given this a try.

First things first, buy a pack of corn tortillas from your local grocery store. I used Chi-Chi’s white corn taco style tortillas. They come in a pack of 18. For the enchilada sauce, I picked up the store brand — Food Lion — of the sauce. You could make your own, which would likely wind up better tasting than what you would find in a can, or you can pick up a premium brand, but the store brand worked out well for me, because all you are doing with the sauce is dipping the tortillas in it prior to cooking. Keep in mind that you don’t need a Blackstone griddle to cook this recipe, but I love griddling outdoors so I rolled with that particular method. You can use a hot cast iron skillet to make these as well in your kitchen.

Overall, you are going to want these base ingredients:

— Corn tortillas
— Cooking oil
— Enchilada sauce
— Your choice of toppings

I stuck with the basics in making these: the above, smoked chuck roast that I had chopped up into bite size pieces of optimal tenderness, Great Value Fiesta blend cheese (cheddar, Monterey Jack, queso quesadilla and asadero cheese) from Wal-Mart, chopped cilantro and diced caramelized onions. You may prefer different ingredients, from a cut of pork or some kind of chicken. These were incredible with the smoked chuck roast that I cooked in my drum smoker, the Barrel House Cooker 18C, so I can’t help but recommend my method rather than others.

My preparation involved dipping the corn tortillas in some warmed cooking oil in a cast iron skillet. I had made chicken and cheese taquitos the day prior to cooking this, so I still had about a half inch of oil in my cast iron pan. I heated it up on medium for about ten minutes and dipped the corn tortillas — one by one — in the oil for about two or three seconds on both sides before adding them to a bowl. I find this step to be crucial, because you aren’t cooking the tortillas this way, but you are making them more pliable by adding them to the hot oil for just a moment. This does not make the final product greasy, but it will help allow the corn tortillas to crisp up enough after it is dipped in the enchilada sauce and subsequently cooked.

In another bowl, I dumped two cans of Food Lion brand enchilada sauce in, which is what you are going to want to dip your corn tortillas into before cooking them.

I fired up the burners on my Blackstone griddle to medium and quickly cooked up the diced onions in order to caramelize them. Different strokes for different folks: you might prefer diced raw onions, but I prefer the flavor of caramelized onions on my tacos. One of my guests that I was cooking for has difficulties eating raw onions due to digestion issues, so cooked onions are more palatable to them, and hey, caramelized onions are delicious, so there is no problem with that. I turned off one of my side burners and moved the caramelized onions over to the far side of the griddle where the burner was turned off. If you are making these inside your home, just remove the onions and place into a bowl or plate.

Afterwards, I added some oil to the hot griddle surface, dipped the corn tortillas — one by one — into the enchilada sauce and added them to the cooking surface. As they cooked away, I topped each tortilla with the aforementioned Fiesta blend cheese, added the smoked beef, spooned out some of the diced onions onto each tortilla and followed that up by topping each tortilla with a smidgen of chopped cilantro, which added a level of freshness in each bite of the finished product.

At this point, I bumped the heat of the burners to high and folded the tortillas over to crisp them up for about one minute on each side before removing them. Now it is time to eat.

18 enchilada tacos with smoked beef

Step-by-Step Instructions

1.) In a cast iron pan, add half an inch of cooking oil, heat for 10 minutes before dipping the corn tortillas, one by one, in the oil for three to five seconds on each side. Remove and add to a bowl.
2.) Dump your enchilada sauce into a separate bowl.
3.) Fire up your griddle or cast iron to medium heat, add a bit of oil and cook the diced onions for a couple of minutes. Remove the onions from the heat source.
4.) Dip the corn tortillas in the enchilada sauce and add to the cooking surface.
5.) Add your toppings.
6.) Bump up the heat and fold the corn tortillas over into tacos. Cook for about a minute on each side in order to achieve a substantial level of crispiness
7.) Remove and eat!