Tag Archive for ‘Grilling’

Cooking Burgers Using 73/27 Ground Beef

73/27 burgers on the Blackstone Griddle with caramelized onions and mushrooms

Here are 16 burgers, made out of 73/27 ground beef, that I cooked on my Blackstone Griddle for a birthday party, along with caramelized onions and mushrooms. Notice how none of them puffed up. Note: these are smash burgers.

Whenever I read about cooking up the best burgers one can concoct, it seems that most people use 80% lean/20% fat ground beef for optimal the optimal lean:fat ratio. Just enough fat to keep the patties moist and juicy, but lean enough for the burger to stand on its own. But what about 73% lean/27% fat ground beef?

Burgers are one of my favorite foods, unabashedly so. My family and friends love them, so when they are visiting, I find myself making them quite often. While I agree that 80/20 is a fantastic ratio of ground beef in a patty to cook up, more often than not I’m buying 73/27 ground beef from my local grocery store (Grant’s Supermarket, in southwest Virginia, if you are wondering) — they often feature it on sale for $1.99/lb. in 5-lb. family packs, so the prospect of having that much meat to throw down for the whole family for just $10 is a game changer. Even more mind-blowing is that sometimes this grocery store will price it, on certain days, at $.99 cents/lb., which is crazy to even think about.

A lot of people will shun that style of ground beef and pay a little extra for 80/20 ground beef, because they’ll consider the fat/overall collective ‘weight’ loss (in the mass of the meat) resulting from during the cooking of the 73/27 ground beef as throwing money down the drain, but here’s the kicker: any time you are cooking burgers with high fat content it is fine, because the best burgers in the world that you can create come from not only the finished product being juicy, but also when the burger is cooking in its own fat. There is nothing like eating a burger with a crust formed thanks to the glorious Maillard reaction (caused by overall contact from the exterior of the burger on a scorching hot cooking surface) that is juicy and oh-so melt in your mouth good internally.

Yes, with 73/27 you will experience substantial fat running out of the meat and running wild in the process, but you should never fear this becoming an issue. Again, the best burgers in the world cook in their own rendered fat.

I will offer this one caveat, though: if you are cooking burgers that feature a high fat content like this in a skillet, particularly a scorching hot cast iron that is properly preheated for maximum crust formation, be wary of how many burgers you are playing into the pan. What happens is, say, if you are cooking four medium-to-large burgers in one skillet, there is going to be a ton of fat that will pool out, and when you flip the burgers, there is potential for the crust to not be the best. This is why I recommend buying an outdoor griddle, as they (Blackstone, Camp Chef, Royal Gourmet, Blue Rhino, etc.) feature grease drains that will remove the excessive amount of grease that covers the cooking surface. However, if you are limited to a cast iron skillet, two burgers at a time with some grease poured out between each cook of the batch of burgers you plan on making will help aid you in your quest for making the best burgers possible.

There are, basically, two burger cooking methods, and one I consider superior than the others, but let’s go through both:

1.) The classic, standard patted-out burger: this is the type of burger you shape into a patty yourself. It is great, nonetheless, but here is what can lead to disaster and ultimately a burger that will be smaller than the bun you place it onto: when you form the patty, no matter how much you flatten it out into a perfect circular shape, it is going to puff up as the fat renders and the proteins contract. You can counteract this by making a shallow indention (the ‘dimple’ method) in the middle of the burger before placing it onto a hot cooking surface, about an inch or so wide. When making burgers this way, especially if I’m going to be cooking them on my charcoal grills, I have also experimented with making small slits in the burger patties with a knife along with the indention, and it has never failed me.

2.) Smash burgers (the best burger method, in my humble opinion): this is by far and away the superior method when it comes to making burgers. I wrote about it here. What you do is, instead of patting the ground beef into a patty, you make a meatball out of it, and the size of the meatball is up to you, and I don’t recommend making it too big (you can always make thin double-burgers on a bun). But you lightly pack the ground beef into a meatball, not forming it too tightly and leaving it slightly loose, and afterwards when you place it onto the screaming hot cooking surface, take a burger press or a cast iron press and smash it down. This does not force out any of the juices that you want to remain in your burger, as the internal meat has not began cooking yet. What this does do, however, is flatten the burger out to achieve maximum surface contact with the burger against the surface of the material you are cooking with, which will yield not only the best crust ever but also keep the meat moist and juicy on the inside. Since the burger is flattened properly, it won’t take but just a few minutes to be ready to flip for a sear on the other side of the meat. The finished product is a juicy inside with a delectable crust on the outside.

While 80/20 may be ‘superior’ in a sense, because it is widely viewed as the standard for the optimal lean-to-fat content of a burger, you shouldn’t sleep on 73/27 just because of the 7% higher fat content. When I’ve made burgers, whether it is using the indention method on pre-patted patties or smashburgers, I have little to no issues with the meat puffing up during the cooking process. It may thicken up a little bit, but your worries should be far and few between.

As always, though, the temperature of your cooking surface will determine the quality of your burger. If your heat isn’t high enough, it will be lackluster because you aren’t going to create the crust that you want in every satisfying bite you take. Use these tips in this post and I promise you that it will change the game of your burgers.

Carne Asada Tacos With Grilled Flank Steak

Carne Asada Tacos With Grilled Flank Steak

Carne Asada Tacos w/Grilled Flank Steak

Believe it or not, this is my first time ever cooking a classic carne asada meal. Carne asada translates to ‘grilled meat’ in English, which I’m no stranger to, but I’m referring to the classic Mexican dish that features skirt, sirloin or flank steak that has been marinated with Hispanic and Tex-Mex flavors that you will find in the grub at your local Mexican restaurant. First time or not, I knocked it out of the park, and if you give this a try, I think you will be in that same ballpark, knocking one out right beside of me.

I have scoured the web for recipes and have picked up inspiration for this dish. There are a lot of similar recipes to this one, which is no surprise, as ‘carne asada taco recipes’ currently yield over 1.5 million search results in Google. However, I add a little bit of a twist to mine that you likely won’t see elsewhere. Alright, then. Let’s cut to the chase and get on with what you are here for. Here is the Grizzly BBQ version carne asada tacos with grilled flank steak.

Note: if you are going to be cooking with flank steak, I highly recommend marinating it. It is a leaner cut of steak, and when it is ready to be sliced and consumed with gusto, you want to cut it against the grain for a tender bite.

Marinade recipe:
In a bowl, mix up…
— 1/4 cup of soy sauce (use reduced sodium soy sauce if you’d like — I’m a grizzled salt fiend, myself)
— 1/3 cup of either canola oil or olive oil
— 1/2 cup of orange juice, or juice hand-squeezed from an orange
— 1/2 cup of chopped cilantro
— Juice from 1 lime
— 4 cloves of minced garlic
— 1 diced jalapeno (remove seeds if you want less spice)
— 1 diced Serrano pepper (much like for the jalapeno, remove the seeds if you want less spice)
— 1 tsp. of cumin
— 1 tsp. of black pepper
— A few arbitrary shakes of Caribeque Big & Bold Beef Rub (optional — this is the twist of the recipe; Caribeque Big & Bold Beef Rub is an avid go-to of mine for anything involving steak)

Add the flank steak (for the record, I used a 1.5 lb. flank steak) to a Ziploc bag and, after mixing up the marinade, pour it over the steak. Be sure that both sides of the meat is amply coated with the marinade prior to sealing up the Ziploc bag, removing as much air as possible before you close it up. Add to the fridge overnight, preferably, or you can do what I did and allow it to soak in the marinade for four or so hours.

Now, for the second best part: the grilling of the flank steak!

Grilling flank steak

The process of grilling the flank steak

Side view of grilling flank steak

Another shot of the grilled flank steak


1.) An hour to 30 minutes prior to your planned cook, drain the meat from the marinade and allow it to sit out at room temperature so that the internal temperature of the meat will adjust to the external temperature when you grill it.

2.) Preheat your grill. You can cook this in a skillet inside your home if you would like, in a cast iron on heat heat, but hey, remember: carne asada means grilled meat, so bust out the grill if you have it. I used a charcoal grill, but if all you have is a gas grill, set that sucker up on high. The following instructions will revolve around charcoal grilling. For that, if you have a charcoal chimney (I highly recommend using one), fill it up with lump charcoal and light it with paper or a lighter cube. Briquettes work fine, but lump burns hotter, and when you are making this, you want the grill to be as hot as possible.

3.) When the charcoal has grayed over with ash (if you have a charcoal chimney, this is when you will want to dump them into one spot of the grill in one big clump), add your grill grate and close up the grill with the intake and exhaust vents wide open. We want this baby to be piping hot.

4.) Wait about 10 minutes for the inside of the grill to become scorching hot. This allows the grates to come up to temperature in order to welcome that steak.

5.) Remove lid and place the flank steak directly over the coals. This was a pretty big, thick flank steak, so your cooking time may deviate from my method, but I cooked the steak for around five minutes on each side.

6.) Remove the steak and wrap tightly in foil in order to rest. Meanwhile, heat some flour tortillas directly on the grill grate over the hot coals. It only took the tortillas 5-6 seconds on each side to be sufficiently heated and browned up. Use corn tortillas if you would like. I would have loved to have used corn tortillas, but all the store-bought tortillas in this region (southwest Virginia) are rubbish (in my humble opinion), and I didn’t have time to whip up a homemade batch.

7.) (Optional) Char up a jalapeno pepper. I like to eat a grilled jalapeno whenever I have tacos. The flavor is a delicious add-on that complements the meal in my personal experience.

8.) Slice up the flank steak (remember: slice against the grain) and serve!

Carne asada tacos with flank steak
*I whipped up a batch of loaded guacamole the day before. If you would like my guacamole recipe, let me know in the comments. The guacamole featured lime juice, diced jalapenos, diced roma tomatoes, a diced red onion, chopped cilantro, salt, pepper and some garlic.*

I’m more than pleased with how well this recipe worked. These carne asada tacos featured classic Hispanic and Tex-Mex flavors that made the finished product taste like it came from a top of the line restaurant. I could only imagine it being made even better if I had used homemade corn tortillas and a touch of Cotija cheese, but as is, I must openly, biased as I may sound, reiterate that these tacos were a home run.

My Advice for Making The Best Smash Burgers Ever

Blackstone Griddles and smash burgers are synonymous with each other, and it’s no surprise as to why: a smoking hot griddle and a sizzling ball of ground beef being smashed into a burger patty, influencing the maximum amount of surface contact for the Maillard reaction to occur, when the amino acids in the meat come into contact with the heat of the griddle, creating the beautiful brown crust and the delicious flavor we all enjoy out of a burger.

I’ve taken better burger photos in my time, so I apologize for how lackluster it is, but take a look at how thin the patty is, with the caramelized crust. I topped this one with cheddar cheese, bacon and caramelized onions & jalapenos.

Big ol’ fat burgers are nice (and I say that because I have a genuine penchant for burgers in general), but in my humble opinion, smash burgers are the best way to prepare a hamburger. When you smash the meatball, you flatten out the created-by-action patty to allow more surface area for the Maillard reaction to build a crust. The outside is given its color and flavor, and the inside stays juicy if not cooked for too long.

While making smash burgers on my Blackstone griddle is my favorite method for preparation, you can make them in a cast iron skillet as well. When I cook them on the griddle, I use high heat during the entire cook, but if I’m making them in a cast iron skillet, while I may preheat on high I will modify the heat to being between medium high to medium. The griddle, to me, is more forgiving than the cast iron on my indoor glass top stove, and maybe it is because the glass top stove, and perhaps that can be attributed to electric glass top stoves not being optimal for the very best cooking methods (debatable, but that is my limited anecdotal $.02 cents for you), so your mileage may vary pending on the equipment used.

When selecting your ground beef for smash burgers, choose a higher fat beef. An 80/20 protein to fat ground beef is the most commonly agreed on superior ratio for burgers, because there is enough fat to deliver premiere flavor in a burger, but not too fatty that a great deal of fat will render out during the cooking process. I go a little extreme, oftentimes, I suppose, because my local grocery store features amazingly cheap prices for 73/27 protein to fat ground beef, as I can usually buy 5 lbs. for $10 — there was even a special one day where it was $.99 cents a lb. and I scored 5 lbs. for $5. Even if you think 73/27 ground beef is too fatty, that was an amazing bargain. With this high fat content, I typically make larger meatballs to account for the rendered fat loss during cooking. However, 3 to 4 ounces of ground beef for smashburgers is typically recommended for 80/20 or 85/20 ground beef, though I must now admit my laziness when it comes to bothering with weighing out the meat when I prepare them. I just measure it by feel and by the judgment of my eyes.

When you have preheated your stovetop or griddle and the meatballs have been placed onto the skillet or griddle, use a heavy duty cast iron press to smash the meatball flat. I use the Blackstone stainless steel press-and-sear burger press. One tip that I recommend for this: use parchment paper under the press to smash the meatball flat in order to prevent sticking. You don’t have to, but it saves a moment of aggravation if some of the cold meat from the top of the beef sticks to the press. You may be wondering if you can use your spatula to smash the meatballs into burgers. Well, you can, I suppose, if you have a spatula that can handle the task, but most spatulas don’t have the weight to properly smash the meatballs, and in my one experience using a flimsy kitchen spatula, it created an absolute mess. Just buy yourself a press and thank me later.

Here’s a better look of the same burger from the first photo. Just admire the crust that was formed on this smash burger.

As for when to season the burgers, I’m typically known for being a guy who loves bold flavors with seasoning on both sides of the meat, but my method involves a bare meatball to begin, and after I smash it into a patty I will liberally season the upfaced side with my choice of seasoning (salt/pepper/garlic sometimes, Caribeque Big & Bold Beef, Reload Rub Fully Loaded, Blackstone All Purpose — just my four favorite methods that I switch up from time to time), and that is the only side I season. I feel that there is no need to season the other side once flipped, because by making the burger patty thin and by generously seasoning the one side, you give it enough flavor that you can taste throughout the patty versus overpowering it.

You may be wondering, “What about adding seasoning into the ground beef and mixing it up before forming the meatballs?” Salt has the potential to dry out meat by drawing out moisture. You want the inside of the patty to be juicy while the outside is properly browned. I will make a loosely packed meatball, because according to the food scientists, that is the way to go, and to my unscientifically inclined taste buds, they agree with said food scientists.

Typically, with my smash burgers, I will flip them after four to five minutes once I see the top of the burgers becoming wet from the rendered fat, as well as observing the edges browning nicely. Three to five minutes once flipped, and you are ready to go.

Brown/toast your buns for even more flavor, and add your favorite toppings. You are good to go from there. Create it however you want it. Plain? With cheese? Loaded with toppings? It is your burger — do how you please.

For my burgers, I like: American cheese or cheddar cheese, bacon, sauteed mushrooms & onions & jalapenos (or habaneros if I can easily find them here). Sometimes I like mixing up mayonnaise with a little ketchup, mustard and dill relish. Occasionally I add hot sauce.

“Troy, you just spent a thousand words writing about how to make a burger, which is one of the most simple things a person can concoct.” Hey, smash burgers are a delicacy in my book and should be considered to be their own food group due to how delicious they are. Homemade smash burgers are way better than any burger you will buy from a restaurant. Methods and techniques are important. Utilizing the right amount of heat is the most crucial variable of the cooking process in churning out the best burger you can potentially make. I’m just adding my personal method, because I want you — the readers — to give it a go and let me know what you think, because I think it will become your favorite burger concocting method.

The Secret to Making the Best Hot Dogs You Will Have Ever Had in Your Life


I grew up eating hot dogs and hamburgers like crazy during the summer. My dad was quite the chef, but he was always working as the owner of his mining parts company and never grilled. My aunt, who lived down the road from us, was always doing the grilling for the family, whether it was done so on a little charcoal grill or on her gas grill.

These hot dogs, on the Blackstone Griddle, changed my entire worldview of hot dogs. Give them a try and you’ll see. Quoting a line from the movie ‘Limitless’, “I was blind, but now I see.”

Laugh all you want, but you are getting a recipe + instruction guide for these hot dogs, whether or not you already see them as a simple cook for an otherwise throwaway dinner.

Recipe
Nathan’s skinless beef franks (you can use the cheapest hot dogs out there, and they’ll still be serviceable, but use quality ‘dogs for a mindblowing flavorgasm for your tastebuds).
— Olive oil
— Granulated garlic
— Black pepper
— Buns
— Your favorite toppings

Instructions
I used my 17″ Tabletop Blackstone Griddle for this cook, setting the heat to medium/medium-low.
— Once the flat top griddle surface was hot with a thin coating of olive oil, I added the hot dogs
— Using a little squirt bottle full of olive oil, I coated the top of the hot dogs with olive oil and sprinkled the granulated garlic and black pepper on top of them
— Moments later, I rolled the hot dogs over and added another layer of granulated garlic and black pepper to them
— Keep turning your hot dogs every 35-40 seconds
— Finish them to the doneness of your liking. I like for my hot dogs to be browned up, but some people like them lightly cooked or even burned. Cook them how you like them.
— Remove and enjoy in a bun with your favorite toppings

Toasted buns are a must

Please give this a try. It’s simple: olive oil, granulated garlic and black pepper. Just a couple of changes transforms a hot dog from being an ordinary ‘dog to being the best damn hot dog you will have ever eaten in your entire life.

The first time I made hot dogs like this, I made my personal homemade chili recipe, which I will share in the near future. It blew my mind as to how good they were. I had never eaten such a delicious hot dog before in my entire life. Before, they were just hot dogs; now, they are “hot damn!” dogs.

If you give hot dogs a shot this way, let me know what you think. I guess you could do the same on a charcoal, gas or pellet grill, but remember: olive oil, granulated garlic and black pepper. Shout out to America’s Griddler, Todd Toven, for this exceptional idea. I doubt I will ever make hot dogs any other way for the rest of my life, but then again, I’m always down to try new things when it comes to going on a flavor journey.

Crazy Cajun Chicken Wings on the Blackstone Griddle (Recipe!)

Crazy Cajun chicken wings on the 36″ Blackstone Griddle.

This is a quick, easy and simple one! I bought a 4 lb. pack of chicken wings from my local grocery store, cut off the wing tips (and disposed of them) and separated the drums from the flats. This made up a little over 20-some wings for $7 (they were marked down to around $1.19/lb.).

All you need
Chicken wings!
Blackstone Crazy Cajun seasoning
Basting cover (optional; I used this one from Blackstone Products)
Duck fat spray (optional)
Oil (I used olive oil)

Instructions
— I sprayed both sides of the drums and flats with duck fat spray and then applied the Crazy Cajun seasoning. I love the duck fat spray in particular because it helps you achieve a crispy skin.
— I fired up two burners of my 36″ Blackstone Griddle and set them both to high.
— Added a thin coating of olive oil to the griddle surface once it was blazing hot, about 10 minutes in.
— Added the wings and covered them with the basting cover for a few minutes
— After a few minutes, I moved the wings around using a pair of tongs and re-covered.
— I repeated that process a couple of times and removed the basting cover from use and turned the heat down to medium until finishing up the wings.

I used a thermometer probe to check the temperature of the wings (I love my Thermapen Mk4 by Thermoworks). I like to get mine to around 175-180 degrees.

I timed this cook! I started them at 5:05 p.m. and finished them up at about 5:25 p.m. for an 18-minute cook time!

I write that the basting cover is optional, but if you aren’t using one, I recommend cooking the wings on medium heat, and doing it without a cover will take 30-40 minutes. I like using the cover because it helps the temps on the inside cook faster before you finish them off to ensure a crispy skin.

These wings were delicious and flavorful. I’m a bit of an unabashed salt fiend, and I have to say the Crazy Cajun seasoning is quite salty, so I loved them. The meat pulled right off the wings very easily and the skin was super crispy, just the way I like it.

When I got my Blackstone, I never thought of doing wings on them, but man oh man are they good. The flat top surface will ensure that you achieve a crispy skin with ease, and the basting cover — which I highly recommend even though I write that its use is genuinely optional — helps cook them faster than without it.

Deep-fried wings? Excellent.
Smoked/grilled wings? Excellent.
Griddle-cooked wings? Just as excellent as deep-fried and smoked/grilled!

Give it a shot and let me know what you think about it.

Barrel House Cooker 18C Review

Maybe I have a smoker fetish. It started when the little lady’s family gave me their old stick burner — a vertical offset Brinkmann Trailmaster. Her dad switched over to a horizontal offset and the one they gave me had been sitting out and not being used. Rather than allowing it to just sit there, they fixed it up and gave it to me! I will always be grateful and appreciative of that act of generosity. I loved using it, but the effects of weathering produced rust and eventually holes and cracks that rendered it unusable for long smokes. Sometimes I feel like I let them down by not being able to take better care of it. I digress.

In June 2017 I bought a Weber Smokey Mountain cooker. It is the holy grail in terms of set it’n’forget it smoking that involves charcoal and wood (I specifically mention that last part because pellet grills might be the ultimate cooker for those in the game for set it’n’forget it cooking). My appetite for collecting different types is insatiable, however.

The rise of barrel cookers seem to be on the up and up, but the UDS (“Ugly Drum Smoker”) design has been around for seemingly eons, with people creating a smoker from the ground up. However, there are two UDS style smokers on the market right now that are more popular than the others. There is the Pit Barrel Cooker, which is the most popular if you count the amount of people touting it on social media (namely Instagram, which is my favorite), and then there is the Barrel House Cooker. There is some kind of legal bullshit going on between the two companies. I won’t get into it because I’m not a lawyer and feel no obligation to talk about the nitty gritty, but apparently whoever was working on the Pit Barrel Cooker, originally, decided to go and assist in the creation of the Barrel House Cooker — that caused shit to hit the fan, and that’s all I know. I don’t really care, and most of the people you see on the web proclaiming they do are drama lovers who enjoy spinning their wheels from what I can discern.

The main attraction to the barrel style of cooking, for me, was the prospect of hanging meats, faster cooker time and less charcoal (compared to the 22.5″ Weber Smokey Mountain cooker that I have; I love my WSM, but it is a charcoal hog and a half). Basically, you hang meats above the charcoal and, in the closed cooking environment, the drippings (read: grease!) from the meats fall onto the charcoal and the smoke from the vapors give the meat a flavor to die for.

For me, it came down to either the PBC (Pit Barrel Cooker) and the BHC (Barrel House Cooker). As you can see by the title of this post, you already know which one I purchased. It basically came down to the ease of adding charcoal during a cook or getting it started more efficiently (the removable middle section from the charcoal base makes it extremely easy) as opposed to the PBC. Furthermore, you can take the grate that the cooker comes with and use it as a hibachi insert by removing the middle section and sitting the grate directly over the coals. For my very first cook, I hung a 3.8-lb. beef Tri-Tip that I purchased from Appalachian Meats in Lebanon, Virginia (hi, Brandon and Victoria! Great people! If you are in the area, check out their shop), cooked it until about 120-125 degrees and then seared it over the grate, hibachi style.

Before purchasing, I watched a good bit of videos of the BHC on YouTube. Something I found to be a common theme was that a few of the folks mentioned that Barrel House Cooker Company sent them their cookers for free because they wanted feedback on the cooker. Objective feedback. Well, opposite of the users on YouTube, I purchased mine at the regular price point ($249 plus tax) and feel even more obligated than those users to deliver a full-fledged objective review given that I pumped cash into it. There is no sunken cost fallacy going on here. Just a dude giving his thoughts on the cooker he bought. By the way, there are two models currently available: the 14D (14″) and the 18C (18″). I like cooking a good bit of food most of the time, so I went with the 18, but the 14 sure is tempting in the future.

The first thing I noticed when I was putting my BHC together was there was a weird lookin’ spot on the charcoal base that looked like a spot of rust. Not a huge deal, but it isn’t something you want to see out of your brand new cooker that you spent good money on either. I contacted them over this and Jeremy Cunha (who I believe is the head honcho of the BHC Co.)* responded by basically saying to use it for a while and, if I run into any problems, contact ’em. I wasn’t so much complaining when I emailed them as much as I was making them aware of a quality control issue. The YouTube user Meathead, who also received a free cooker from the company, told me in a comment that Barrel House is coming out with some stainless steel charcoal baskets and that they would send me one for free if I asked them. I asked Jeremy about this, but he did not address it in the replied email. Hmm… hopefully the stainless steel charcoal baskets aren’t only sent free to the YouTubers who were already sent free cookers… again, I emphasize, hopefully that isn’t the case as that would be pretty disappointing for BHC loyalists who splurged and spent a great deal of moolah, but I digress… the customer service is solid. You can expect responses in a timely manner. I’ve dealt with them via email and phone.

(*Quick retraction here: an embarrassing one, actually, but I’ll leave it since it is hilarious and I can poke fun at myself. I genuinely thought Jeremy Cunha was the man behind the Barrel House Cooker. Alright, alright, I’ve learned from the man himself that he is not. Jeremy is a brand ambassador for Barrel House Co.! So, he is a brand ambassador. Still, a cool dude and you can tell he loves the cooker or else he wouldn’t be doing what he is doing. I bet the BHC team had a laugh about that one. Looking back, I will, as well! Apparently the owner/president behind the product is a low-key guy. Dude must be like Charlie (i.e Charlie’s Angels). Either way, he is the braintrust behind the company and is the man with ideas. I’m probably on his shitlist for getting the ‘head honcho of BHC Co.’ wrong. Ha.)

Assembly was extremely easy and hassle-free. The only thing I hate about putting things together is keeping up with screws, washers, nuts and bolts. I have a phobia about losing small parts when putting things together. Maybe it is just my cooker, but the first thing I noticed is that the middle section does not snugly sit on the charcoal base. Maybe that was the intended design, but I can kinda rock it back and forth on the charcoal base by barely moving it. If it is intended to be that way, fair game, but I thought that would be a point worth noting.

I had to wait four days before I could actually use my BHC, but by cracky, I finally had my chance. First cook: that beef Tri-Tip from Appalachian Meats that I was talking about.

Tri-Tip on the Barrel House Cooker Hibachi.

Everything went better than expected. I rubbed the tri-tip with Hardcore Carnivore Black and hung it in the Barrel House Cooker with some hickory wood and Kingsford charcoal (good ol’ KBB — Kingsford blue bag). At 125-130 degrees or so (as monitored by my Thermoworks Smoke thermometer), I removed the tri-tip from the H-frame and removed the hook from the tri-tip, added the grate to the charcoal base and used it as a hibachi to sear my tri-tip on both sides, about a minute and a half per each side. I let it rest, and well, as you can see by the above pictures, it was cooked to a perfect medium rare and it was delicious!

The semi-boneless leg of lamb that I hung in my Barrel House Cooker.

The next day, I hung a whole chicken and a semi-boneless leg of lamb. Again, I used KBB as my fuel source. I can’t, for the life of me, remember what the hell I rubbed the chicken with, but I was in luck with the semi-boneless leg of lamb. I had never consumed lamb before prior to this experience. I was seeking opinions on what rub I should use, when luck would have it that I received my recently ordered package from The Killer Cook and they, by chance, sent me a sample of their Mediterranean Spice blend. I consulted with TKC on Instagram about this choice of rub for lamb, and whattya know, it pairs perfectly with it (Mediterranean and lamb goes hand in hand anyhow, but I wanted to confirm). The chicken was awesome, but the lamb was fantastic. It was super tender; I cooked it until about 140 degrees, if I recall correctly.

Before wrapping spare ribs.

The third day, I hung four racks of spare ribs. On two, I rubbed ’em with Caribeque Honey Heat and on the other two I used Meat Church Holy Gospel. No much to say about these ribs except that they were phenomenal. The smokey flavor was tremendous. I’m used to ribs on my Weber Smokey Moutain. They come out virtually perfect on the WSM, but the smokey flavor that comes from the Barrel House Cooker, with the juices hitting the hot coals and creating a distinct flavor profile, you just can’t beat that.

Since then, I’ve even tried a trial of grilling on the BHC… sat the charcoal ring on the H-frame and grilled some all-natural beef dogs a few days after my first few cooks. It passed the test, but for grilling, I love my Weber kettle.

I used both my Weber Smokey Mountain as well as my Barrel House Cooker for Mother’s Day. Ribs in the BHC and pork belly burnt ends, a pork butt and mac and cheese in the WSM. My family, and some of my family’s friends loved all the food, which is the most important thing to me.

The unfortunate chipping/flaking issue. Hopefully it is simply cosmetic/superficial and nothing that will produce anything that will shorten the life of the cooker such as rust.

A few cooks in, I noticed some chipping/flaking around the handles on the sides of my BHC… a little disconcerting, but as long as no rust produces from it, I don’t care. Seems to be a bit of a quality control issue, but again, if it is only a superficial mark, I couldn’t care less. This is an outdoor cooker/grill/smoker… it’s going to get filthy even with a cover. I just want the cooker to last several years without any hiccups, because I know I’m going to use the hell out of it.

In the future, I’m going to use lump charcoal in my BHC, for the most part, because it doesn’t handle the ash fallout from KBB as well as my WSM does. The insane amount of ash produced from the Kingsford seems to smother the fire worse than what it does in my WSM. Strange, but it happens. I’m going to try different things. All in all, you have to learn your cooker and its kinks… they (by ‘they’, I mean different types of grills and smokers) all ‘behave’ differently’.

Whole chicken rubbed with Reload Rub Packin’ Heat.

I hung another whole bird in my BHC today, using the brand new Reload Rub seasoning, “Packin’ Heat”. I have come to the conclusion that you can’t have chicken from anything better than this Barrel House Cooker. It was tender, juicy and full of flavor (and delicious spiciness, thanks to the Packin’ Heat from Reload)!

If I haven’t made it clear, I’m going to unabashedly state it now: I’m in absolute love with my Barrel House Cooker. It is everything I have wanted it to be. I’ve been asked by people, “Well, can’t you do the same type of cooking in your WSM by removing the water pan?” Sure, but I like that the BHC is a little bit smaller, and if I was going to consistently do the same thing with the WSM I would have to create some modifications as well as find something, or create something, that mirrors the H-frame or something like it from the BHC, and quite frankly I’m too damn lazy to do that. Also, going back to the BHC being smaller than the WSM, the WSM is a proverbial charcoal hog, while the BHC definitely is not. I love both of my cookers for their own purposes, but I think hanging meat in the BHC is badass and puts it over the top.

I’m sure the other barrel cooker is pretty awesome, but I love my BHC. If you are in the market for a smoker, I absolutely recommend the Barrel House Cooker. The customer service will take care of you if you have any problems, and you’ll have a full-fledged smoker that is about as fail-safe as a smoker can get. I can’t wait to eventually smoke a pork butt and a beef brisket in mine. It’s just too bad that a beef brisket costs 1/4th of a car payment where I live.

Barrel House Cooker: Buy or pass?

BUY. BUY. BUY. Then BUY some meats and HANG IT! (And then buy some beer and invite your friends over.)

An Update and an Apology (Blackstone Griddlin’ and Weber Grillin’)

No excuses. I’ve neglected this blog and not on purpose. Call it laziness, call it whatever. I should have been posting at least once a week or once every ten days minimum, but it’s been over four months since I’ve posted anything while I still lavish my Instagram with content.

A little over a week after my last post, I bought a 36″ Blackstone griddle on sale at Wal-Mart. The hype reverberated throughout the social media walls on Instagram and curiosity got the best of me. Overall thoughts: It’s a badass cooking gadget. My mother, who is a burgers-cooked-over-charcoal fanatic, thinks smashburgers is the greatest thing ever (she might not be wrong). Being able to cook a horde of food in one fell swoop is fantastic. Using the Blackstone was my first experience bothering with using propane for cooking. If you catch it on sale, snag it!


I received the brand new limited edition red Weber kettle grill a few weeks ago, and I’m loving it. There are a couple of minor blemishes in the finish, but it’s no big deal. It’s a grill, it’s outside, it’s going to get cooked on and it’s going to get dirty. With that said, a lot of customers are receiving damaged grills. I believe they are the vocal minority, as I think most people who received grills in good shape are quiet and/or busy cooking on ’em, but it is a bit disconcerting that so many people are receiving these damaged grills which are purportedly limited edition.

It’s my first Weber kettle, so I’m just enjoying it and having a good time. Removing the ash catcher is a little strenuous, but the more I do it I guess I’ll be developing bodybuilder-esque grip strength soon enough.

All in all, since receiving it a couple weeks ago, I’ve cooked on the kettle about five times now, most recently cooking up a couple of flat iron steaks with some peppers and onions yesterday.